Product Details:
Payment & Shipping Terms:
|
| Product Name: | 16 Port Media Converter Chas | Voltage: | 220AC Or 48VDC |
|---|---|---|---|
| Slots: | 14 Slots For Stand-alone,16 Port F1*BNC SDI | Power: | Dual Power Supply |
| Application: | Network Centralized Managem | Color: | Black |
| Support: | CE/FCC/RoHs/ISO 9001 | ||
| High Light: | fiber optic to ethernet converter,managed media converter |
||
2U 14 Slots Fiber Media Converter Rack-Mount Chassis with dual power supply NMS function
Key Features
Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX10/100Mbps and full/half duplex automatically configure in TP port MDI/MDI-X Auto NegotiationWDM Technology Combines Dual Fiber Cables into Single Fiber. Greatly save the Installation cost of Expensive Fiber Cable
| Parameter | Specifications | ||
| Number of slots | 14 | ||
| Structure | 2U rack | ||
| LED indication | POWER (power supply) | ||
| Max power consumption | 95W | ||
| Operating temperature | -10-55 | ||
| Operating humidity | 5%~90% | ||
| Maintaining temperature | -40-70 | ||
| Maintaining humidity | 5% ~ 90% non-condensing | ||
| Dimensions of rack | 90mm (H) * 485mm (W) * 245mm (D) | ||
| Power configuration | Single power supply | ||
| dual power supply for warm backup mode | |||
| Power input | AC Voltage | AC 85~265V | |
| Frequency | 50/60 Hz | ||
| DC voltage | DC5V 16A | ||
| Power output | DC | 5V | 16A |
rack mount media converter Features
(1) The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK.
(2) Supplying the converters or powers to be plugged and played.
(3) 2U high:19 inch standard design
(4) It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance
rack mount media converter Technical parameters
(1) Capacity:14 slots available. Every 10/100M Converter Card occupies one slot, every 10/100/1000M Converter Card occupies two slots.
(2) Power input:AC 100~260V,50~60Hz; output:DC +5V 12A 3) Vein: ≤50mv
(4) Noise:≤50mv
(5) Power protection: protection from over voltage, over current and short circuit
(6) Ambient temperature:0 ~ +50°C
(7) Storage temperature:-20°C~70°C
(8) Humidity:5% ~ 90%
(9) Dimensions: 485(wide) x 245(length) x 90(high) mm
Fault and maintenance of media converters
| Fault description | Cause description | Maintenance |
| POWER LED Lamps are off | Haven’t connected the power plug or not a valid connection | Connect the power plug and make sure it is a valid connection |
| Link/Act LED Lamp is off | 1.Haven’t connected the electrical cables to the electrical port or not a valid connection | Connect the electrical cables to the electrical port and make sure it’s a valid connection |
| 2.Used the wrong electrical cables for electrical connection | Use right type of electrical cables for electrical connection | |
| 3.Any fault with the NIC and the terminal of Ethernet | To make sure the NIC and the terminal of Ethernet can work normally | |
| FX and FX-link/Act LED Lamps are off | 1.There might be any fault with the terminal optical devices | Check the terminal optical devices and the main fiber to see if they can work normally. If not ,then maintain them |
| 2.The optical fiber has broken down or the connection of optical fiber is not valid | ||
| 3.The optical fiber is over-loss | ||
| TX and FX LED Lamps are normal but the data can not be transmitted | 1.The connection between optical fiber and devices is not valid ,this will cause the TX power not strong enough | 1.Check the fiber connectors and make sure the connection between optical fiber and devices is valid |
| 2.The system get power just for a little moment or any changes for the network ,these may cost a little time for media converters to adapt | 2.If this option can still not work a long time after all installations, then stop the power supply ,wait a little moment and try again with the power on |
Ordering information
| Part No | Description |
| HD-14-2A/B | 2U,14 slots, Dual AC power supply (For 1ch and 2 ch video converter modules) |
| HD-4U-2A/B | 4U,18 slots, Dual AC power supply (For 4ch and 8 ch video converter modules) |
The Unmanaged Chassis Media Converter transmits 10/100Base Ethernet electrical signal through fiber, realize TX/FX converter
2U 14 Slots Fiber Media Converter Rack-Mount Chassis with dual power supply NMS function
